Imaging System & Micromachining |
||||
IGM
200 |
||||
| The IGM 200 is a fully integrated micro-machining package that provides output scan voltages for connection to a Ion/Electron beam system. The software facilities are extremely powerful allowing 2D and 3D machining operations. Coupled with the secondary electron detector system (SED 02) an image of the sample and machining process are displayed real time on screen. | ||||
FIBIMS ..A raster scan PCI card with extensive
micro-machining and image generation capability. Supplied with an advanced
software control package |
 |
|||
SED 02... Secondary electron/ion detector system with computer controlled power supply and software. |
 |
|||
SCA 001..Scan Amplifier driven from the FIBIMS PCI card via a 20 bit optocouples serial interface. Four outputs are provided (X1,X2,Y1,Y2) for the ion/electron beams scan plate connections. |
 |
|||
An
example of the imaging and micro-machining power of the IGM 200 system |
||||
 |
The image shown left is a Seondary Electron image of a micro-channel plate with 10um diameter holes. The Ionoptika logo was micro-machined in to the surface from a bitmap file with a 25kV LMIG. This image was taken courtesy of Southampton University using the IGM200 system which is an integral part of the Ionoptika IFS 25 instrument. |
|||